Parts
Cherry's Industrial Equipment now houses OEM parts for your equipment. If you don't see the item you need or have questions, please reach out to us at 1-877-350-2748. We can work with you to make sure your machine is at its best.
Brand
Available for Online Purchase
Category
Hydac Return Filter
SKU:
CHE0075
Filter Element, Return Filter Hydac, 10 Micron Hydraulic filter elements are used to remove contamination from a lube oil or hydraulic fluid system. These hydraulic filters provide the highest level of clean fluids to reduce operating costs and prevent failure. For all continuous duty machines.
$122.32
Sump Strainer Filter
SKU:
52015
Filter, Sump Strainer Filter 3/4 FNPT 5 GPM 100 Mesh HYDAC Suction Strainer Elements are designed for installation introduction lines of pumps. Extra caution should be taken to ensure that the suction elements are always mounted below the minimum oil level of the reservoir.
$87.90
Skate table wheel 3"
SKU:
50540
Skate table wheel 3" OD x 1-1/4" L w/bearing. Includes (2) bushings, (1) nylock, (1) bolt. For use with PSR-73, PSR-90, PSR-96, PSR-100, PSR-104, PSR-110, PSR-116 and PSR-118. Please refer to the owner's manual for quantity required.
$61.10
Cylinder-Turnover
SKU:
50840/P
HydraulicTurnover Cylinder - 3-1/2" Bore x 24" Stroke x 1.25" Rod (w/ welded rod eye & bushing) For use with PSR-73, PSR-90, PSR-96, PSR-100, PSR-104, PSR-110, PSR-116 and PSR-118. Note: Some models require (2) two cylinders please refer to your owner's manual for quantity. Direct replacement for part number 50840, 50840/C, 50840/E, 50840/F, 50840/G
$945.00
Gravity Roller 1.9"
SKU:
50510
Gravity Roller 1.9" OD x 6" L. For use with PSR-73, PSR-90, PSR-96, PSR-100, PSR-104, PSR-110, PSR-116 and PSR-118. Quantity required: 3
$29.00
N/C Proximity Sensor
SKU:
BES03RP
Balluff DC 3-Wire Inductive Proximity Sensor, M18x1x65mm Housing, Flush Mount, 8mm Sensing Range, PNP NC Switching Output, M12 3-Pin Connection, Nickel Plated Brass Housing, w/Yellow LED (Replaces BES007Y)
For Inverters, Dispensers, and Retrievers.
$77.10
FARO Bearing 70 mm
SKU:
104610
This 70 mm combination bearing is designed for smooth, reliable rotation in pallet handling and industrial equipment. Built to handle repetitive motion and load stress, it helps maintain proper alignment and reduce wear in moving assemblies where precision matters. Used on all the SC model Pallet Inverters. Check the owner's manual for quantity required.
$192.92
Pin-Retaining 1
SKU:
10390
Steel pin-retaining component measuring 1" OD by 3-3/8" L, designed to secure hydraulic cylinder connection points and moving assemblies. Provides reliable retention under load while allowing proper movement where required. Used on both Inverters and PSR's.
$23.49
Rubber Buffer (Set of 2)
SKU:
10563
Set of two rubber buffers designed for use on inverters pre-2022. These buffers help absorb shock, reduce vibration, and protect both equipment and operators during operation and load transfer.
$49.95
Black Push Button
SKU:
E10615
Durable black push button designed for industrial control panels and operator interfaces. Built for frequent use, it provides reliable actuation and clear tactile feedback in demanding production and material-handling environments. Push Button Assembly, Retriever Pedestal: Consists of (1) each Black Mushroom Button, Black Mushroom Plate, NO Contact, NC Contact, Legend Holder, Custom Legend
$53.38
Rexroth Hand Lever
SKU:
R900543856
Replacement hand lever used for manual control of hydraulic or mechanical functions. Includes handle, knob, lever box and mounting bolts. Used on pre-2019 lever controlled PSR machines.
$263.67
ACM Bushing for Hinge Pin 1-1/2
SKU:
50996
Bushing designed to fit 1-1/2 OD inch hinge pins, providing a durable wear surface that reduces friction and extends the life of hinged assemblies. For use with PSR-73, PSR-90, PSR-96, PSR-100, PSR-104, PSR-110, PSR-116 and PSR-118. Please refer to the owner's manual for quantity required.
$72.50
Bearing Spherical
SKU:
50555
The 50555 Spherical Bearing is a 1-inch ID, press-fit bearing designed for the lower connection point between the hydraulic cylinder and the base frame. Engineered for smooth pivoting and long service life, it provides reliable load support in demanding material-handling applications. For use with PSR-73, PSR-90, PSR-96, PSR-100, PSR-104, PSR-110, PSR-116 and PSR-118.Note: Some equipment models require two (2) bearings; please consult your owner’s manual to confirm the correct quantity.
$77.50
FARO Bearing 88.4 mm with mounting plate
SKU:
104612
88.4 mm combination bearing supplied with an integrated mounting plate for secure installation. Designed to support rotational loads while maintaining alignment. Used on the DC and GL model Pallet Inverters. Check the owners manual for quantity required.
$205.10
Rexroth Hand Lever Valve
SKU:
4WMM6G5X
Rexroth directional control valve assembly with hand lever actuation. Commonly used in hydraulic systems where manual control is required. Includes hand lever, knob, lever box and valve body. Used on pre-2019 PSR machines.
$844.34
ACM Wear Pad
SKU:
10325/2
ACM wear pad designed to protect contact surfaces from abrasion and repetitive impact. Helps reduce metal-to-metal wear, extending the service life of rack components. Used on the SC, DC and GL model Pallet Inverter. Standard Composite wear pad, 3.8"x1.9"x0.5."
$97.50
AW32 Hydraulic Oil- 5 Gallon Pail
SKU:
5GAL-AW32
AW32 hydraulic oil supplied in a 5-gallon pail, formulated for reliable performance in retrievers and low-temperature inverter applications. Provides consistent lubrication, corrosion protection, and smooth hydraulic operation in cold or variable environments.
$104.50
Relay and Base
SKU:
RIF-1-RPT-LDP-24DC/2X21
The RIF-1-RPT-LDP-24DC/2x21 is a compact relay contact and base assembly designed for reliable control performance in industrial automation and machinery applications. This 24 VDC unit features a dual-pole (2x21) configuration, LED status indication, and a robust socketed base for secure installation and quick replacement. Direct replacement for part number RIF-1-RSC-LDP-24DC/2X21
$30.00
Cotter Pins 1/4
SKU:
10265
Set of cotter pins measuring 1/4 inch by 1-1/2 inches, used to secure pins, shafts, and fasteners in place. A simple but critical component for preventing loosening in moving or load-bearing assemblies.
$1.00
White Illuminated Pushbutton Assembly
SKU:
E12721
Durable push button designed for industrial control panels and operator interfaces. Built for frequent use, it provides reliable actuation and clear tactile feedback in demanding production and material-handling environments. Illuminates to show operation of function on Inverter pendant. Assembly contains 22.5mm button, N.O. Contact, 24VDC LED Module and name plate holder.
$116.25
Modified Sump Strainer Filter
SKU:
10470
Modified sump strainer filter rated at 3 GPM with 100-mesh filtration and a 3-PSI bypass. Designed for older inverter systems, this filter helps protect hydraulic components by capturing debris while maintaining proper flow.
$71.25
Hydac Return Filter Housing with Replacement
SKU:
RFMBN/HC75BD10A1.0/12T
The RFMBN/HC75BD10A1.0/12T is a high-efficiency return-line filter assembly engineered for hydraulic systems requiring reliable fluid cleanliness and protection of sensitive components. Featuring a durable housing, a HC75BD10A1.0 high-capacity filter element, and a 12T connection configuration. Direct replacement for RFMBN/HC75BD10A
$205.76
Contact, NC
SKU:
M22-K01
Normally closed (NC) contact block used in control circuits and operator stations. Provides reliable electrical continuity and is commonly paired with push buttons or selector switches in industrial control panels.
$15.87
Hinge Pin 8-3/4
SKU:
50995-1
Heavy-duty hinge pin measuring 1-1/2 inches by 8-3/4 inches, used in pivot points and hinged assemblies. Built to handle high loads and repeated motion in pallet inverters and similar industrial equipment.
Pin w/o a grease fitting at the end of the cylinder. Should be sold as set with 50996.
$41.88
N/O Prox Sensor
SKU:
BES008L
Balluff normally open proximity sensor designed for non-contact detection of metal objects. Used in automation and material-handling systems to provide reliable position and presence sensing in harsh industrial environments.
$101.10
Eaton Motor Protector
SKU:
XTPR010BC1
Eaton motor protector designed to safeguard motors from overload and electrical faults. Helps prevent downtime and equipment damage by providing reliable motor protection in industrial and material-handling applications. Verify application by contacting the Parts and Service department.
$125.42
Compression Spring
SKU:
96485K249
|
Brand:
Cherry's Industrial Equipment Corp
Compression Spring: 8"L x 3.15, Compression Spring: 8"L x 3.156" OD x 3/8" wire (PD-4500 & 9000 Pallet Dispenser)
$119.00
Pallet Truck Ring
SKU:
DS-100
|
Brand:
Load DogMolded Urethane ring with a 2¼" deep well to hold the Manual Pallet Truck steer wheels in place. Tapered sides provide a shallow ramp for entry into the Pallet Truck Stop.
$35.00
PTS Rubber Pallet Truck Stop
SKU:
PTS-101
|
Brand:
Cherry's IndustrialWhether in a warehouse or inside a trailer, properly securing a pallet truck is critical to maintaining a safe and productive operation. A rubber pallet truck stop provides a simple, reliable way to prevent pallet jacks from rolling or tipping during transport—without the need to flip the truck over or spend extra time securing it to load bars. By keeping pallet trucks upright and stationary, this solution reduces the risk of injury, protects equipment from damage, and helps drivers maintain efficient delivery schedules with minimal added effort.
$45.00
Hinge Pin 7-1/4
SKU:
50995
Heavy-duty hinge pin measuring 1-1/2 inches by 7-1/4 inches, used in pivot points and hinged assemblies. Built to handle high loads and repeated motion in pallet inverters and similar industrial equipment.
Pin w/o a grease fitting at the end of the cylinder. Should be sold as set with 50996.
